throughput when running at 20 MHz
and consume very low power when
running at a lower frequency. Typical
power consumption in 3.6V active
mode at 1 MHz is 1.1 mA and less
than 0.45 mA in idle mode. They can
operate down to 2V at 10 MHz and
2.4V at 20 MHz.
The AT89LP214 and AT89LP213
are available in 14-pin TSSOP and
PDIP packages while the AT89LP216
is available in 16-pin TSS0P, SOIC,
and PDIP packages. The 10K unit
price is $0.87 for AT89LP214
and AT89LP213, and $0.91 for
AT89LP216. Samples for AT89LP414,
AT89LP413, and AT89LP416 will be
available in 4Q 2006.
For more information, contact:
2325 Orchard Pkwy.
San Jose, CA 95131
Atmel AVRbased Micro64/128
Embedded Controller Module
8-Channel Analog to Digital Convertor
Real Time Clock/Calender
29 Digital I/O
SPI & I2C Bus
Two Serial Ports
Serial Boot Loader
RS-232, 422 or 485
Rates up to 250 Kbps
Only 1.5 Cubic Inches
BASIC and C Prog. Languages
Inexpensive CodeVision C Compiler
Starting at Only
$119 - Single Qty
The Micro6/128 Development
Board takes the Micro64/128 I/O
pins and expands them out to
solder pads and headers for ease
of connection when developing.
It also connects USART1 to RS-232
drivers or directly to screw
terminals for RS-422 or RS-485
communication. USART0 is also
connected to RS-232 drivers. The
RS-232 drivers are connected to
two DB9 connectors. This board
includes a prototyping area so the user can add external
circuitry. There is an onboard voltage regulator for powering the
Micro64/128 and additional circuitry. The Micro64/64A/128/128A
development system comes complete with a Micro64, Micro64A,
Micro128 or Micro128A, a Micro64/128 Development Board, and a
VISIT WWW.MICROMINT.COM FOR MORE
INFORMATION or Call 1-800-635-3355
32 August 2006
the IEXR and
IEHR series of
rugged 70W-150W DC/DC converters,
which are ideal for a variety of applications, including process control, instrumentation, and industrial installations.
The converters are available with
three wide input voltage ranges of
10-16 VDC, 21-60 VDC, or 60-132
VDC. They deliver nominal output
power of either 70W to 150W, with
numerous single output voltage
models, ranging from 8 VDC to 52
VDC and two models that feature a
unique 110 VDC output. Custom
output voltages are also possible.
These convection cooled converters are housed in a chassis mount vented enclosure and are rated for 0-50°C
operation with derating above 40°C.
An option for 19” x 2U rack mounting
or DIN Rail mounting is available.
The IEXR and IEHR converters are
rugged in design and feature full galvanic isolation, fused input protection,
output protection for either short
circuit or overload conditions, reverse
polarity protection, and input transient protection. All models are tightly
regulated to <0.5% line and <0.7%
load. Efficiencies are >80% and ripple
is typically 1% peak-to-peak. All the
converters in this series are in compliance with CISPR22 EMI standards.
All models can be configured for
optional N+1 parallel redundancy
operation. The IEHR series is also suitable for battery charging applications.
Series pricing is from $171 each
at 100 pieces. Significant OEM quantity discounts are available. Delivery is
8-10 weeks ARO.
For more information, contact:
200 Butterfield Dr.
Ashland, MA 01721