CircuitSpecialists.com
CircuitSpecialists.com
CircuitSpecialists.com
CLOSEOUTS
Liimited To Stock On Hand
Sorry....No Back Orders
12-28VDC, 283 CFM Axial Fan
• CFM: 282.5
• Voltage (rated): 24VDC, useable on 12-28VDC
• Current: 1.1A
• Power: 26W
• Blade Diameter: 5-5/8"
• Dimensions: 6-3/4 x 5-7/8 x 2"
• Manufactured by PAPST (Made in Germany)
Part Number: 6424/2H
Price: $14.95 10+ $12.95
60 x 60 x 20mm 12VDC Brushless Fan
• CFM: 13.06
• Voltage: 12VDC
• Current: .11A
• Noise: 24dba
• Dimensions: 60 x 60 x 20 MM
• Manufactured by Delta Electronics
Part Number: AUB0612LD
Price: $1.90 10+ $1.59 100+ 0.99
12VDC 52CFM Fan
• CFM: 52
• Voltage: 12VDC
• Current: .3A
• Blade Diameter: 3-3/8"
• 6" leads
• Dimensions: 3-5/8 x 3-5/8 x 1.0"
• Manufactured by AVC
Part Number: C9025S12H
Price: $2.99 10+ $2.49 100+ 1.99
Stepper Motors
Part #: Motor Frame Holding Torque: Price:
Size:
42BYGH404 NEMA 17 3.4kg.cm/47oz.in $17.95
57BYGH207 NEMA 23 8kg.cm/111oz.in $24.95
57BYGH303 NEMA 23 15kg.cm/208oz.in $29.95
57BYGH405 NEMA 23 20kg.cm/277oz.in $34.95
85BYGH350B-03 NEMA 34 48kg.in/665oz.in $79.95
85BYGH350C-03 NEMA34 63kg.cm/874oz.in$119.95
Stepper Motor Controllers: 2 Phase Microstepping
Stepper Motor Driver (Bi-polar & Unipolar Motors)
Part #: Dimensions: MicroStep: Price:
XCW220 100mm x 61mm 1(200), 1/2(400), 1/4(800), $39.95
x 19mm 1/8(1600)
CW220 99mm x 65mm 1/2(400), 1/8(1600) $49.95
x 30mm
CW230 115mm x 72mm 1(200), 1/2(400), 1/4(800), $59.95
x 32mm 1/8(1600), 1/16(3200),
1/32(6400), 1/64(12800)
CW250 140mm x 94mm 1(200), 1/2(400), 1/8(1600) $69.95
x 45mm
CW860 147mm x 97mm 1(200), 1/2(400), 1/4(800), $119.95
x 30mm 1/8(1600), 1/16(3200),
1/32(6400), 1/64(12800),
128(25600), 1/5(1000),
1/10(2000), 1/25(5000),
1/50(10000), 1/125(25000),
1/250(50000)
12VDC, 6. 8 RPM Gear Motor
• Rated at 6. 8 RPM @12VDC
• 5mm (3/16")dia x 10mm (3/8") flatted steel shaft with bronze bearings
• Dimensions: L; 2-11/16", (body)Dia; 1-1/4"
• Manufactured by Igarashi Motors
Part Number: 2732-0300
Price: $12.95 10+ $9.95
Slim SPST, 10A High Isolation Structure Relay
• Nominal voltage: 12VDC
• Nominal current: 44mA
• Coil resistance: 273 Ohms ± 10%
• Max voltage: 15.6VDC
• Manufactured by Hankuk
Part Number: HR-CR7DC12
Price: $0.49
See Our Web Site For Additional Specifications!
mCU Controlled True RMS
High Accuracy DMM
The CSI2205D Micro Control Unit auto-ranging DMM is UL Approved and designed for measuring resistance, HOT
capacitance, DC & True RMS AC voltage, DC & True RMS AC current, frequency, duty cycle and temper- Item!
ature, along with the ability to test diodes, transistors and continuity. A special feature included is the
Auto Test Lead Input Indication Technology. This
will ensure that whenever you switch functions on
the DMM, the proper positive port LED will light
indicating where to plug the red test lead into so
that no mistakes can be made by the user. It even
goes so far as to give a warning tone if you do plug
the lead into the incorrect jack! A very helpful feature for the novice and even for the experienced
user who is using the meter in less then ideal lighting conditions. Overall, we find this to be a meter
that compares very favorably with much higher
priced competitors on the market today!
Detaills at Web Site
> Test Equipment > Digital Multimeters
Item CSI2205D
100,000 Count Programmable
Data Logging DMM
A power house DMM with 100,000 count accuracy and a
built-in data logger that will help you find intermittant
problems and monitor equipment while
you are busy working on other jobs.
The D620 can record
and store in it's own
internal memory up
to 37,300 time
stamped data values
in all functions by
simply pressing a
button. Finally, a
DMM that provides
the user with features and performance at a fraction of
the cost of a similar
FLUKE DMM.
•0.05% of basic accuracy, 100,000 count of high
resolution
•Data Logger Memory: 37,300 Points Only
•RS-232C interface •True RMS measurements for AC $169.00
•Auto Calibration
Item# PROTEK D620
Detaiills at Web Siite
> Test Equipment > Digital Multimeters
Only
$59.00
3-1/2 Digit LCD Panel Meter
(enhanced version)
The PM-128E is an enhanced version of
our best selling PM-128A. The E version
can be set to work with either a 5VDC or
9VDC power source, will perform with
either a common ground or an isoalted
ground, and is supplied with easy to use
jumper points so the end user can easily
set the measurement range required.
Detaiils at Web Siite
> Panel Meters > Digital LCD Display
$12.25 Item#
Quantity PM-128E
Price Breaks
at website!
Circuit Specialists, Inc. 220 S. Country Club Dr., Mesa, AZ 85210
800-528-1417 / 480-464-2485 / FAX: 480-464-5824