ITEM DESCRIPTION
Flight Recorder
❑ R1-R6 3.3K, 5%
❑ R7-R8 1K, 5%
❑ R9-R11 18K, 1%
❑ R12-R17 12K, 1%
❑ C1-C3 0.1 µF
❑ C4 10 µF, 6V tantalum
❑ C5 0.1 µF
❑ D1 High efficiency yellow LED
❑ D2 High efficiency red LED
❑ D3 BAT85, Schottky diode
❑ D4 1N4148, General-purpose diode
❑ Q1 2N3904, NPN transistor
❑ B1 3. 6 volt, 15 mAh NiMH battery
❑ SW1 Pushbutton
❑ J1 Stereo PCB mounted jack socket
❑ J2 10 way PCB mounted plug
❑ IC1 PICAXE-18X, microcontroller
(Revolution Education Ltd)
❑ IC2 FM24CL256, Serial FRAM
(Ramtron International Corp)
❑ IC3 MAX 883CPA, Low drop regulator
(Maxim Integrated Products)
Instrumentation
❑ R1, R4, R5 22K, 1%
❑ R2 27K, 1%
❑ R3 220, 1%
❑ R6 56K, 1%
❑ VR1 10K, 20 turn trimmer
❑ C1 10 µF, 6 volt tant
❑ C2 0.1 µF
❑ J2 10 way PCB mounted socket
❑ IC1 TS922IN, Dual op-amp
(STMicroelectronics)
❑ IC2 MAX4194ESA Instrumentation
amp (Maxim Integrated Products)
❑ IC3 24PPCFA6A, 2 to15 PSIA pressure
sensor (Honeywell)
❑ IC4 MM7260Q, Accelerometer
breakout board
(SparkFun Electronics)
www.orteches.com www.orteches.com www.orteches.com www.orteches.com www.orteches.com www.orteches.com
www.orteches.com www.orteches.com www.orteches.com www.orteches.com www.orteches.com www.orteches.com
ELEXOL Ether I/O 24
UDP/IP controlled digital input/output module featuring three 8-bit ports with 5V level
signal lines. Each of the 24 lines can be independently programmed as either an input
or an output. Connects to any TCP/IP protocol network.
NEW!
• Supports ARP, BOOTP, DHCP, ICMP and UDP/IP protocols
• Standard 10Base T Ethernet Interface; RJ45 connector
• 24 independently programmable signal lines with configurable CMOS,
TTL or Schmitt Trigger thresholds and programmable pull-ups per line
• Easy connection by three 10-way box headers
• On-board 50MIPS flash micro-controller may be reprogrammed to suit
specific applications
• Integrated switch-mode voltage regulator allows power supplies from
8-32VDC
• User 5V 500mA output to power external interface boards or sensors
• Compact module – 72 x 72 x 24mm
Great range of I/O- 24 peripherals, too...
CONNECTOR/LED BOARD OPTO INPUT BOARD RELAY OUPUT BOARD SWITCH/PUSH
Provides screw terminal Provides 8 Opto isolated Provides 8 isolated relay BUTTON BOARD
connections plus optional either inputs for each of the I/O- 24 contact outputs suitable for a
Provides 8 switch/push buttons
pull up or pull down resistors and pins with LED indications. variety of loads.
with LED indicators showing the
LED port status indication.
status of the I/O pin.
Visit our website www.orteches.com
Ortech Education Systems
1119 - 9th Ave. S. • Moorhead, MN 56560
218.287.1379
www.orteches.com www.orteches.com www.orteches.com www.orteches.com www.orteches.com www.orteches.com
www.orteches.com www.orteches.com www.orteches.com www.orteches.com www.orteches.com www.orteches.com
Complete Fabrication Center
Quality prototype parts within 24 hours!!
Precision Laser, Waterjet, Plasma, Machining,
Micro-Machining, Forming, and Welding Capabilities
Parts from practically any material
and from 0.001” to 6.000” in
thickness.
Finishes such as powder coat,
paint, plating, anodizing, silk
screen, and more!
* Quick
* Affordable
* Precise
* No Minimums
24 hour turn time based on quantity and finish requirements
Fabricated, silkscreened and
shipped in 2 business days
with no expedite charges!
Integrated Ideas & Technologies, Inc.
6164 W. Seltice Way • Post Falls, ID • 83854 • USA
Ph (208) 262-7200 • Fax (208) 262-7177 •
www.iitmetalfab.com
January 2009 39