To scale the raw incoming A2D data, click on the
pencil icon to bring up the Configuration menu (Figure
11). Next, click on the Colors + Scales tab. You will notice
that the lower part of the tab has settings for all 10 of the
analog channels (0 through 9). Notice that each analog
channel has a different assigned color that you can
change if you wish; each analog channel is selected (or
deselected) with a check mark in the box to the left.
However, since we’re plotting only one channel of analog
data (channel 0 by default), the color is black. We can
leave the other analog channels checked since there is
December 2013 55
Figure 10. Y axis
set to 1050.
Figure 11. Configuration menu.
Figure 12. Scale to voltage. Figure 13. Scale to voltage.