else; I picked pin 12. This change is reflected in the
KS0108_Arduino.h file at the article link. Use this file to
replace the one in /Arduino/libraries/glcd/config (which
will be found in the Documents folder on a Windows
machine). Or, you can make this edit yourself.
Be aware that not all graphical LCDs work with the
GLCD library cited in the sources. Check the pictures of
the pins: there should be CS1 on 15 and CS2 on 16.
The version in Photo 3 uses an Arduino Nano. It is
also using a BMP180 — an updated version of the
barometric sensor. All these are functionally the same as
those mentioned previously.
26 April 2015
Arduino Development Board:
Uno or Nano
KS0108 Graphical LCD
BMP085 or BMP180 Barometric Pressure Sensor
220 ohm Resistor
C code for BMP085:
Graphical LCD Library:
CODE SOURCES ■ PHOTO 4.
Call to order at 1-800-783-4624
or go to www.nutsvolts.com