designed for a 25x25 mm package size, and operates at
bandwidths up to 75 GHz with less than 1 dB of insertion
loss. The socket is designed to dissipate seven watts using
a compression screw with heatsink fins, and can be
customized up to 100 watts with a modified fin design on
top of the screw, and by adding an axial flow fan. The
contact resistance is typically 30 milliohms per pin.
The socket is mounted on the target printed circuit
board (PCB) with no soldering, and uses very small real
estate allowing capacitors/resistors to be placed close by.
Other passive components can be placed on the back
side of PCB by creating custom cutouts in the stiffener
plate. The socket is constructed with a clamshell lid which
incorporates a quick insertion method so that ICs can be
changed out quickly. To use, place the device inside the
socket, close the lid by latching, and apply downward
pressure by turning the heatsink compression screw.
The GT-BGA-2019 socket is constructed with high
performance and low inductance elastomer contactor. The
temperature range is - 55°C to +160°C. It works with ICs
such as BGA, 25x25 mm with 24x24 array, and 1 mm
Pricing for the GT-BGA-2019 is $909 at qty 1, with
reduced pricing available depending on quantity required.
May 2015 25
Includes the MDE8051 training board, power
supply, serial cable
Purchase Orders are accepted from Educational Institutions,
US Government and Research Centers
NATIONAL RF, INC.
CUSTOMER PUTS IT IN A MEAT CAN!!
Visit www.NationalRF.com for this
and other Radio Products!
The 75-NS- 3
covers 3. 5
11 MHz and
is offered as
MINI HF RADIO
Phone: 360-515-0691 ; firstname.lastname@example.org
; 6V-40V -
; Single H-bridge or dual half
; Current and Temp protected
; Jumper select Enable & PWM
; Robust power terminals
35A / 50A+ peak
MegaMoto GT- Mega Motor Control for Arduino™
; 8V-42V - 125A / 200A peak!!
; Single H-bridge
; RC and Pot control
; Overload protected
; For your BIG bots
For more information, contact: