675+ New
Products
430+ Pages
Full Color
Visit us at
www.jaycar.com/catalog and
obtain your free copy of our 430+ page, full
color catalog. We have an extensive range of
electronics kits and the best in
innovative gadgets.
Stereo VU and Peak Meter Kit
KC-5447 $40.75 + post & packing POST AND PACKING CHARGES:
Accurately monitor audio signals to prevent signal Order Value Cost Order Value Cost
clipping and ensure optimum recording levels. This $25 - $49.99 $7.50 $200 - $499.99 $60
unit is very responsive and uses two 16-segment $50 - $99.99 $20 $500+ $75
bargraphs to display signal levels and transients peaks $100 - $199.99 $40
in real time. There are a number of display options to Max weight 12lb (5kg). Heavier
select, and both the signal threshold and signal level parcels POA. Minimum order $25.
calibration for each segment are adjustable. Kit Note: Products are dispatched from Australia,
supplied with PCBs, LCD and all electronic local customs duty and taxes may apply.
components. Accuracy within How to order:
1dB for signals above -40dB. Phone: Call Australian Eastern Standard Time
• Case not included use Mon-Fri on 1800 784 0263
HB-6082 $5.50 Email: techstore@jaycar.com
Post: PO BOX 6424, Silverwater NSW 1811.
Requires 9-12VDC Wall adapter use Jameco Powertool Battery Charger Expect 10-14 Days For Air parcel delivery
#252751 $12.05 Short form kit Controller DC Relay Switch
Battery Zapper MKII KC-5436 $23.25 + post & packing KC-5434 $8.75 + post & packing Enhance the performance of the charger An extremely useful and versatile kit that
KC-5427 $58.00 + post & packing supplied with your power tool with this enables you to use a tiny trigger current - as
This kit attacks a common cause of failure in wet lead controller. It incorporates charge timeout, low as 400µA at 12V to switch up to 30A at
acid cell batteries: sulfation. The circuit produces short min and max temperature monitoring, Delta 50VDC. It has an isolated input, and is suitable for
bursts of high level energy to reverse the damaging charge detection, power and charge LED a variety of triggering options. The kit includes PCB with overlay
sulfation effect. This new improved unit features a indicator, adjustable Delta V, temperature and all electronic components with clear English instructions.
battery health checker with LED indicator, new circuit settings, and optional adjustable trickle
protection against badly sulfated batteries, test points charge. Suits both Ni- Voltage Regulator Kit
for a DMM and connection for a battery charger. Kit Cd and Ni-MH cells. KC-5446 $8.75 + post & packing
includes case with screen printed Kit includes PCB This handy voltage regulator can provide up to
lid, PCB with overlay, all with overlay, case, 1,000mA at any voltage from 1.3 to 22VDC.
electronic components and all electronic Ideal for experimental projects or as a mini bench
clear English instructions. components and power supply etc. Kit supplied with PCB and all
Suitable for 6, 12 and 24V clear English instructions. electronic components.
batteries
• Powered by the Programmable High Energy Ignition System
battery itself
Improved
model for
2007
Ignition System Hand Controller Ignition Coil Driver
KC-5442 $52.25 + post & packing KC-5386 $37.95 + KC-5443 $26.00 +
This advanced and versatile ignition system post & packing post & packing
50MHz Frequency Meter MKII Kit can be used on both two & four stroke This LCD hand controller is Add this ignition coil driver to
KC-5440 $40.75 + post & packing engines. The system can be used to modify required during the initial the KC-5442 Programmable
This compact, low cost 50MHZ Frequency Meter is the factory ignition timing or as the basis for setting-up procedure. It plugs Ignition System and you have a
invaluable for servicing and diagnostics. This upgraded a stand-alone ignition system with variable into the main unit and can be complete stand-alone ignition
version, has a prescaler switch which changes the units ignition timing, electronic coil control and used while the engine is either system that will trigger from a
from Mhz to GHz, kHz to MHz and Hz to kHz, anti-knock sensing. running or stopped. Using this range of sources including
and has 10kHz rounding to enable RC Features: Hand Controller, you can set all points, Hall Effect sensors,
modellers to measure more accurately. Kit • Timing retard & advance over a wide range the initial parameters and also optical sensors, or the 5 volt
includes PCB with overlay, • Suitable for single coil systems program the ignition signal from the car's ECU. Kit
enclosure, LCD and all • Dwell adjustment advance/retard curve. Kit includes PCB with overlay and
electronic components. • Single or dual supplied with silk screened and all specified components.
Other features include: mapping ranges machined case, PCB, LCD, and • Kit supplied with PCB, and all
• 8 digit reading (LCD) • Max & min RPM all electronic components. electronic components
• Prescaler switch adjustment
• Autoranging Hz, kHz or MHz • Optional knock sensing
• 3 resolution modes including 10kHz rounding, • Optional coil driver
0.1Hz up to 150Hz, 1Hz up to 16MHz and 10Hz up • Kit supplied with PCB, diecast case, and all
to 16MHz electronic components
Jacob’s Ladder High Voltage Display Kit
KC-5445 $23.25 + post & packing
With this kit and the purchase of a 12V ignition coil
(available from auto stores and parts recyclers), create
an awesome rising ladder of noisy sparks that emits the
distinct smell of ozone. This improved circuit is suited to
modern high power ignition coils and will
deliver a spectacular visual display. Kit includes
PCB, pre-cut wire/ladder and all electronic
components.
• 12V car battery or 5 Amp DC
power supply required
Log on to
www.jaycar.com/catalog
for your FREE catalog!
1-800-784-0263
(Monday - Friday 09.00 to 17. 30 GMT + 10 hours only).
For those who want to write: 100 Silverwater Rd
Silverwater NSW 2128 Sydney AUSTRALIA
430+
page
Catalog
All
prices in
USD
www.jaycar.com