Double sided PCB 63 mm (2.5”) x 51 mm (2.0”) x 23 mm (0.88”)
12V DC nominal (10V to 15V).
HV1: Regulated 175V to 200V DC, 0 to 15 mA.
HV2: Unregulated (zener clamped) 60V DC nominal, 0 to 5 mA.
LV1: Pass through of DC input voltage (aids in wiring or piggy-back
LV2: Regulated 5.0V ±5% DC, 0 to 100 mA.
Control Input: (optional)
TTL (0-5V) compatible HV shutdown: Used to turn off HV and save
tubes, while keeping 5V and the DC pass through active. Defaults to
HV on, connect to 5-15V to shut down.
DC Input: LED (Yellow).
HV Output: NE2 Neon.
HV Set single turn potentiometer. Covers approx. 175-200V.
Four 3. 3 mm (0.130” #4 clearance) mounting holes.
Connector: Molex KK- 100 header eight-position header.
Maximum current in regulation: 15 mA (enough for six medium to large
■ TABLE 1. Specifications.
■ FIGURE 1. Photo of completed module.
■ FIGURE 2
April 2008 33