■ HARDWARE ■ SOFTWARE ■ GADGETS ■ TOOLS
enter the vehicle’s combustion
chamber via the air intake supply and
mix with the fuel source, whether it is
gasoline or diesel. The hydrogen and
oxygen gasses react with the fuel
tank’s petroleum allowing it to burn
faster and more efficiently, so more of
the fuel is used to power the vehicle
instead of released as a byproduct,
which means less emissions and
improved fuel economy. The
Hydraficient Water Fuel Cell Kit is
compatible with almost every make
and year of car, van or SUV, and with
gasoline or diesel powered engines.
“Consumers are looking for
simple and cost-efficient ways to
reduce their carbon footprint and
spend less on gas,” said Mike
VanPelt, spokesperson for
Hydraficient, LLC. “We realized that
making these improvements didn’t
have to be expensive or complicated
and the Hydraficient Water Fuel Cell
Kit is an easy to implement solution
that just about any consumer can
install quickly and without having to
choose between affordability and
positive results.”
The Hydraficient Water Fuel Cell
Kit only requires the addition of tap
water, making it easy to maintain and
safe for the engine. Only six to seven
amps of electricity are required to
run the Kit, minimizing the reliance
on the engine for power and
decreasing heat emissions. Onboard
sensors also maintain optimal water
temperature, preventing overheating
or freezing.
slewing endpoint positions of
your choice.
Features are interference-free
servo checking when among groups
using live R/C equipment; test servo
travel, positioning, and throttle a
djustment; check for servo
alignments, binding, damaged gear
trains, or weak motors; enable
mechanical adjustment of precise
zero position; check step response;
permit first order frequency response;
check for vibration problems;
facilitate mechanical break-in;
perform endurance testing; input is
protected against reversed voltage;
convenience power to driven equipment fused at 1A; accommodates
For more information, contact:
Hydraficient LLC
Web: www.hydraficient.com
SERVO
COMMANDER
The Servo Commander is a
portable, hand-held device that
generates the command signal
required to drive servos and Electronic
Speed Controls (ESC) without the
use of an R/C transmitter and R/C
receiver. You can manually adjust the
servo position or the ESC speed, or
continuously cycle between two
December 2008 31
