GUITAR KITS
4 Channel Versatile Mixer Kit
KC-5448 $57.50 plus postage & packing
This is an improved version of our popular guitar mixer kit
and has a number of enhancements that make it even more
versatile. The input sensitivity of each of the four channels
is adjustable from a few millivolts to over 1V, so you plug
in a range of input signals from a microphone to a line
level signal from a CD player etc. A headphone amplifier
circuit is included for monitoring purposes. A three stage EQ
makes this is a very versatile mixer that will operate from
12VDC, 45mA. Kit includes
case, PCB with overlay
and all electronic
components.
Short Circuits III Kit -
Guitar Practice Amp
KJ-8092 $10.00 plus postage & packing
This low cost amplifier allows you to practice your guitar
without annoying the neighbors. It has a guitar type input
socket, small speaker and volume.
• Kit supplied with PCB, speaker,
socket and electronic
components.
• 12VDC power required.
• PCB: 105 x 60mm
Instructions NOT included. See KJ-8093 $1.25 for individual
instructions or full color project book BJ-8505 $7.50
KC-5417 $20.50 plus postage & packing
Enables you to drive up to two stereo headphones from
any line level (1volt peak to peak) input. The circuit
features a facility to drive headphones with impedances
from about 8-600 ohms. The Jaycar kit comes with
all specified board components and
quality fibreglass tinned PCB.
STEREO HEADPHONE
DISTRIBUTION AMPLIFIER
• Power Supply to Suit: KC-5418 $11.75
• PC board size: 134 x 103mm
KC-5152 $4.75 plus postage & packing
This tiny module uses the LM386 audio IC, and will deliver
0.5W into 8 ohms from a 9 volt supply making it ideal for
all those basic audio projects. It
features variable gain, will happily
run from 4-12VDC and is smaller
than a 9 volt battery, allowing it
to fit into the tightest of spaces.
"THE CHAMP" AUDIO AMPLIFIER
• PCB and all electronic components included.
• PCB: 46 x 26mm
KC-5172 $9.50 plus postage & packing
Voice operated relays are used for
'hands free' radio communications
and some PA applications etc.
Instead of pushing a button, this
device is activated by the sound
of a voice. This tiny kit fits in the
tightest spaces and has almost no
turn-on delay. 12VDC 35mA required. Kit is supplied
with PCB electret mic, and all specified components.
PCB: 47 x 44mm
"MINIVOX" VOICE OPERATED RELAY
KC-5454 $25.50 plus postage & packing
This kit has been improved and can now be set up easily
to record two, four or eight different messages for
random-access playback or a single message for ‘tape
mode’ playback. Also, it now provides cleaner and glitch-
free line-level audio output suitable for feeding an
amplifier or PA system. It can be powered from any
source of 9-14V DC. Supplied with silk
screened and solder masked
PCB and all electronic
components.
45 SECOND VOICE RECORDER MODULE
PCB: 120 x 58mm
Order Value Cost
$25 - $49.99 $7.50
$50 - $99.99 $20
$100 - $199.99 $40
$200 - $499.99 $60
$500+ $75
Note: Products are dispatched from Australia, so
local customs duty & taxes may apply.
Prices valid until 31/10/2010
POST & PACKING CHARGES
Max weight 12lb (5kg).
Heavier parcels POA.
Minimum order $25.
HOW TO ORDER
www.jaycar.com
1-800-784-0263*
+ 61 2 8832 3118*
techstore@jaycar.com
P.O. Box 107, Rydalmere NSW 2116 Australia
• ALL PRICING IN US DOLLARS
• MINIMUM ORDER ONLY $25
*Australian Eastern Standard Time
(Monday - Friday 09.00 to 17. 30 GMT + 10 hours)
Note: 10-14 days for air parcel delivery
WEB:
PHONE:
FAX:
EMAIL:
POST:
Order online: www.jaycar.com
Starship Enterprise Door Sound Emulator
KC-5423 $23.25 plus postage & packing
FOR ALL YOU TREKKIE FANS!
This easy to build kit emulates the
unique sound of a cabin door
opening or closing on the Starship
Enterprise. The sound can be
triggered by switch contacts or
even fitted to automatic doors.
Comes with PCB with overlay,
speaker, case and all specified
components.
9-12VDC regulated.
Short Circuits II Project -
Sound Like a Dalek
KJ-8228 $14.00 plus postage & packing
This project will change your voice into that metallic
sounding robot voice so familiar in the space adventure
movies. PCB and parts supplied. Connect it
to the no brainer amp and get really
scary! Requires 9V battery.
PCB: 102 x 57mm
SCI-FI
Instructions NOT included.
See KJ-8229 $1.25 for individual instructions or full color
project book BJ-8504 $6.50
Short Circuits II Project -
Knight Rider Light Scanner
KJ-8236 $11.75 plus postage & packing
Now you can make the light scanner that goes on the
bonnet of that famous car. Looks fantastic in
all sorts of places! PCB and all parts
supplied. Requires 9V
battery.
PCB: 102 x 55mm
Instructions NOT included. See KJ-8237 $1.25 for individual
instructions or full color project book BJ-8504 $6.50
LED Sabre with Light & Sound Effects
GT-3520 $10.00 plus postage & packing
Challenge your friends in an
intergalactic battle and bring
balance to the force. Extremely light
and durable, made of tough acrylic to
take all the knocks of traveling around the
galaxy at light speed. Sound and light effects.
Size: 710(L) x 48(Dia)mm
NEW KIT OF
THE MONTH
Remote Control Digital Timer Kit
KC-5496 $20.00 plus postage & packing
Remote-controlled digital timer with a bright
20mm-high 7-segment red LED display. It can count
up or down from one second to 100 hours in 1-
second increments. Its timing period can either be
set and controlled using the remote control or it
can be automatically controlled via external
trigger/reset inputs. An internal relay and buzzer
activate when the unit times out. The relay
contacts can be used to switch devices rated up to
30VDC or 24VAC and the project can be powered
from a plugpack or a battery. Short form kit only -
you'll need to add your own
universal remote, power supply
and enclosure.
• 9-12VDC @300mA
• PCB and components
NEW TO
JAYCAR