9,000 Lumen 120 W 9,000 Lumen 120 Watt Out att Outdoor LED Light door LED Light
This is a powerful outdoor LED light that provides 9,000 lumens (luminous flux) using just 120 watts of power! Ideal for
narrow or wide streets, parking lots and industrial sites. 9,000 lm using just 120 watts od power! The housing is made from
cast aluminum and meets IP (Ingress Protection) code 66 (dust tight, no ingress of dust: water tight, water from heavy
seas or water projected in powerful jets shall not enter the housing in harmful quantities). The LED glass lens is made from
high quality borosilicate glass which is the same substanced used in high quality DSLR lenses and telescopes. This lens
material was chosen because of its low coefficient of thermal expansion and ideal refractive index properties.
1000”s of Items Online! 1-800-528-1417 Fax: 480-464-5824 Since 1971
Programmable DC Electronic Load Programmable DC Electronic Load
0~80V / 0~40A 0~80V / 0~40A
The 3721A Programmable DC Electronic Load provides
excellent performance with sophisticated features found on
much more expensive units. This 400 watt, 40 Amp, 0~ 80
volt Programmable DC Electric Load can be used to test
all sorts of DC power sources including power supplies and
is especially helpful to battery manufacturing processes.
This DC load features constant voltage, constant resistance, constant current and constant power settings. The
end user can design programs that control precisely all of
the load values and time durations for each step of a test
sequence. Up to nine 10 step programs can be internally
stored in the 3721A Programmable DC Load.
4 basic functions: CC, CV, CR & CP
8 basic test modes: CCL, CCH, CV, CRL, CRM, CRH, CPV & CPC
High-speed sequence, high-speed transient, short circuit,
battery discharge and other functions.
Programable current slew rate.
Multiple groups of parameters and lists can be saved & recalled.
Supports SCPI and LabView with included software.
Current Rating: 0~40A
Voltage Rating: 0~80V
Power Rating: 400W at 40oC
Programmable DC Electronic Loads Programmable DC Electronic Loads
Easy drop-in replacement and installation in place of an existing
traditional street light and/ or flood lights
* Built-in power supply (PSU)
Adjustable armature angle mechanism accomodates various
* Flexible mounting features allow for use as parking lot lights.
industrial site lighting, Even inside warehouse lighting
* Compatible with commone AC street lamp power sources:
AC input 100-240VAC, 50/60Hz
* Color Temperature: Similiar to daylight (6000 Kelvin)
Water & dust proof complying to IP 66 (International Protection
Designed with integrated cooling fins to maintain constant and
stable operating temperature
* Applications: Parking lots, parking garages, basketball courts,
sports courts, tennis courts, pool decks, BBQ decks, back yards,
apartment complexs, recreation areas, side streets, main roads,
and all sorts of outdoor lighting applications.
Approx Dimensions: 660mm lengh x 360mm width x 100 mm thick
LED LIGHT LED LIGHT
Easily mounted to a standard 2. 5" diameter light pole.
Get full specifications at:
This is a terrific soldering station featuring a
microprocessor controlled temperature set up
system with great versatility. The unit includes 3
preset temperature settings that are user definable so you can turn on the system & push one
button to go to the temperature range you desire.
Specific system temps can also be set with an
easy to use push button up/down button AND
when you turn off this station, the unit keeps the
last used temperature in memory & automaticly
returns to that setting the next time the user turns
the system on. The temperature display can be
set to display in Celsius or Fahrenheit scale.
60 W 60 Watt Digit att Digital Soldering S al Soldering Station ation
For use with traditional or Lead Free Soldering
* 60 watt dual core ceramic heater
* 150 to 450 degree Celsius Temperature range
* Versatile easy to read liquid crystal display
* 3 preset & user definable temperature settings.
Automaticly remembers previous temperature setting
* Display in Celsius or Fahrenheit scale
* 3 foot cord length from station to iron tip
* Broad selection of replacement tips available
Thease devices can be used with supplies up
to 360VDC and 30A. It features a rotary
selection switch and a numeric keypad used
to input the maximum voltage, current and
power settings. These electronic DC loads
are perfect for use in laboratory environments
and schools, or for testing DC power supplies
or high-capacity batteries. It also features
memory, and can also be connected to a PC,
to implement remote control and supervision.
360V/150W (CSI3710A) $349.00
360V/300W (CSI3711A) $499.00
The CSI-Station-3DLF is a powerful 60 watt soldering system. The fast heat recovery provided by
a 60 watt system like this allows the user to solder both traditional solder and lead free solder.
This system features a grounded tip to protect
delicate circuits from static charge. Also included
is a seperate iron holder. Circuit Specialists stocks
a large supply of tips for this station.
$49.00 $49.00 Item# CSI-S CSI-Station-3DLF ation-3DLF
Circuit Specialists carries a wide selection of traditional & lead-free soldering equipment, including soldering irons, soldering stations, hot-air
rework stations, focused infrared systems, reflow ovens, pre-heating
systems, regular and lead-free solder, solder flux, and soldering aids for
both thru-hole and surface-mount soldering.
See our complete line of soldering equipment at:
Circuit Specialists, Inc.
Phone: 800-528-1417 / 480-464-2485 / Fax: 480-464-5824