RAMSEY ELECTRONICS®
590 Fishers Station Drive
Victor, NY 14564
(800) 446-2295
(585) 924-4560
Prices, availability, and specifications are subject to change. We are not responsible for typos, stupids, printer’s bleed, or 4th of July
fireworks accidents! In the true holiday spirit, Robin made me do this ad copy instead of going on the family picnic! Not Fair!
Visit www.ramseykits.com for the latest pricing, specials, terms and conditions. Copyright 2014 Ramsey Electronics®...so there!
800-446-2295
www.ramseykits.com
GET THE DISCOUNT!
Mention or enter the coupon
code NVRMZ142 and receive
10% off your order!
Next Generation Classic Nixie Tube Clocks!
THE NEW STANDARD IN NIXIE CLOCKS!
Our next generation of classic Nixie tube clocks perfectly mesh today's technology with the Nixie era technology of the 60's. Of course, features you'd expect with a typical clock are all supported with the Nixie
clock... and a whole lot more! Time wise, the clocks are designed around a quartz crystal timebase, therefore are not AC power frequency dependent like a lot of clocks. This means they can be used in any country regardless of power frequency, with the included 12VDC regulated power supply. The clocks are also
programmable for 12 or 24 hour mode, various AM/PM indications, programmable leading zero blanking,
and include a programmable alarm with snooze.
Unlike most Nixie clocks, the clocks also display the date in DD.MM. YY, MM.DD. YY, or YY.MM.DD format,
which can be programmed to display for a few seconds at the end of each minute either as a static display,
or by a neat scrolling in/out from alternating sides of the display. Display wise, the clocks feature a programmable night mode with dim or blank display, a programmable
master blank tube saver, hard or soft fade digit change, and even have a built-in "Slot Machine" cathode poisoning prevention routine. Programming and setting the clock is
a breeze with simple 2-button entries on the rear panel. The clocks are available in our signature hand rubbed Teak & Maple or futuristic clear acrylic bases.
WE CROSSED THE TECHNOLOGY TIMELINE!
We then jumped the technological timeline of the 60's Nixie displays by adding the latest multi-colored LEDs to the base of the Nixie tubes to provide hundreds of illumination colors to highlight the glass tubes! The LED lighting can be programmed to any color and brightness combination of the colors red, green, or blue to suit your mood or
environment. Then we leaped over the technological timeline by integrating an optional GPS time base reference for the ultimate in clock accuracy! The small optional GPS
receiver module is factory assembled and tested, and plugs directly into the back of the clock to give your Nixie clock accuracy you could only dream of! The new series
clocks are available in 6-tube and 4-tube versions, with your choice of bases, and your choice of kit or factory assembled & tested. If you’re looking for the ultimate conversation piece, with a trip down nostalgia lane, check out our clocks at www.ramseykits.com/nixie.
; Our latest generation Nixie clock, 6 or 4 tube!
; Today's latest technology with yesterday's display!
; Choice of our signature hand rubbed Teak/Maple
or acrylic base!
; Choice of Nixie tubes types (IN- 14 or IN- 82)
; Low-cost GPS receiver timebase option!
; Programmable color LED tube mood lighting!
; The ultimate conversation piece!
NIXIE CLOCKS Classic Nixie Tube Clocks, Teak/Maple or See-Through Acrylic Base, Kit or Factory Assembled From $229.95
Now you can easily control and monitor up to 8 separate circuits via the standard Ethernet network in your home or office.
Connection wise it couldn't be simpler. The controller functions as an IP based web server, so it can be controlled by any
internet browser that can reach your network! There are no drivers or proprietary software required, just access the controller like any web page from your PC, laptop, or even your smartphone! Security
is assured allowing up to 4 separate user credentials. The controller can be set to a specific static IP within your network
subnet or can be set to DHCP (auto negotiate). The controller can even be programmed to send you an email to notify and
confirm power up and status changes!
To simplify the connection of your equipment to the controller, 8 separate and isolated relay outputs are provided! This gives
you internet or network control of up to 8 separate functions. No need to worry about interfacing a logic high or logic low,
or burning up the interface! The applications are endless! From something as simple as turning on and monitoring lights at
your house with a normal latched closure to advanced control of your electronic gadgets, radio equipment, or even your
garage door! Each relay contact is rated at 12A at 30VDC or 16A at 230VAC. Each of the 8 channels has built-in timer and
scheduler programs for day, weekend, working days, every day, and every day except Sunday. Relay control functions are
programmable for on, off, or pulse (1-99 seconds, 1-99 minutes, or 1-99 hours). In addition to control functions, the web
interface also displays and confirms the status of each channel. Each channel can be custom labeled to your specific function name. The controller operates on 12VDC or 12VAC at 500mA or our new AC121 global 12VDC switching power supply
over to the left! Factory assembled, tested, and ready to go! Even includes a Cat- 5 cable!
8-Channel Ethernet Remote Controller
; 8 separate relay controls!
; Built-in web interface for easy operation!
; User defined TCP server port!
; Static or DHCP IP address!
; Sends email at power-up and event changes!
; Multiple user authentications
; On-board LCD display
VM201 8-Channel Remote Ethernet Controller, Factory Assembled & Tested $169.95
Remotely Control and Monitor
Your Equipment On-Line!
SPECIFICATIONS
Channels: 8, with separate relay outputs
Format: IEEE 802.3 compatible Ethernet, 10Mbps
TCP/IP: IPV4, static or DHCP
NETBios: User defined name
Server: TCP, SNTP, email
TCP Port: User defined
Display: On-board LCD, time or network status
Labels: User defined for input and all outputs
Users: Administrator plus 3 users
Timers: 28 times max
Contacts: 12A@30VDC, 16A@230VAC x 8
Power: 12VDC, 12VAC, 500mA
Mounting: PC board or optional DIN rail enclosure
; Build It!
; Learn It!
; Achieve It!
; Enjoy It!
Where Electronics...
Is Always Fun!